timers rip triggered

Format

timers rip triggered { minimum-interval minimum-interval | incremental-interval incremental-interval | maximum-interval maximum-interval } ^*

undo timers rip triggered [ minimum-interval [ minimum-interval ] | incremental-interval [ incremental-interval ] | maximum-interval [ maximum-interval ] ] ^*

Parameters

Parameter	Description	Value
minimum-interval minimum-interval	Specifies the minimum interval for triggering Update packets.	The value is an integer ranging from 100 to 5000, in milliseconds. The default value is 100.
incremental-interval incremental-interval	Specifies the incremental interval for triggering Update packets.	The value is an integer ranging from 100 to 1000, in milliseconds. The default value is 100.
maximum-interval maximum-interval	Specifies the maximum interval for triggering Update packets.	The value is an integer ranging from 200 to 5000, in milliseconds. The default value is 5000.

Parameter

Description

Value

minimum-interval minimum-interval

Specifies the minimum interval for triggering Update packets.

The value is an integer ranging from 100 to 5000, in milliseconds. The default value is 100.

incremental-interval incremental-interval

Specifies the incremental interval for triggering Update packets.

The value is an integer ranging from 100 to 1000, in milliseconds. The default value is 100.

maximum-interval maximum-interval

Specifies the maximum interval for triggering Update packets.

The value is an integer ranging from 200 to 5000, in milliseconds. The default value is 5000.

Views

RIP view

Default Level

2: Configuration level

Task Name and Operations

Task Name	Operations
rip	write

Usage Guidelines

Usage Scenario

On a stable network, you can set a large value for the triggered timer. On a network whose topology frequently changes, do not set the value of the triggered timer too small; otherwise devices will send Update packets frequently.

Configuration Impact

If the timers rip triggered command is run more than once, the latest configuration overrides the previous one.

Precautions

If you run the undo timers rip triggered command without specifying other parameters (or all parameters), the triggered timer is disabled. If you specify other parameters (do not specify all parameters), it means that the triggered timer is still turned on, but the specified parameter value is restored to the default value.

Example

# set the triggered timer value to 1000 ms.

<HUAWEI> system-view
[~HUAWEI] rip 1
[*HUAWEI-rip-1] timers rip triggered minimum-interval 1000