ripng output

Function

The ripng output command enables an interface to send RIPng packets.

The undo ripng output command disables an interface from sending RIPng packets.

By default, an interface can send RIPng packets.

Format

ripng output

undo ripng output

Parameters

None

Views

100GE interface view, 10GE interface view, 25GE sub-interface view, 25GE interface view, 400GE interface view, 40GE interface view, 50GE sub-interface view, 50GE interface view, Eth-Trunk interface view, FlexE interface view, GE optical interface view, GE electrical interface view, GMPLS-UNI interface view, Global VE sub-interface view, Tunnel interface view, VE sub-interface view, VLANIF interface view

Default Level

2: Configuration level

Task Name and Operations

Task Name	Operations
ripng	write

Usage Guidelines

Usage Scenario

When a device running RIPng is connected to a network running other routing protocols, you can run the undo ripng output command on the interface that connects the device to the network to prevent the interface from sending RIPng packets to the network.

Example

# Disable GigabitEthernet 0/1/0 interface to send RIPng packets.

<HUAWEI> system-view
[~HUAWEI] interface GigabitEthernet 0/1/0
[~HUAWEI-GigabitEthernet0/1/0] ipv6 enable
[*HUAWEI-GigabitEthernet0/1/0] undo ripng output