region-confederation(RPKI-region-validation veiw)

Function

Using the region-confederation command, you can create an area confederation.

Using the undo region-confederation command, you can delete an area confederation.

By default, no regional confederation is created.

Format

region-confederation region-confederation-id

undo region-confederation region-confederation-id

Parameters

Parameter	Description	Value
region-confederation-id	Specifies the confederation ID of an area. The confederation ID of each area must be unique.	The value is an integer that ranges from 1 to 4294967295.

Parameter

Description

Value

region-confederation-id

Specifies the confederation ID of an area. The confederation ID of each area must be unique.

The value is an integer that ranges from 1 to 4294967295.

Views

RPKI-region-validation veiw

Default Level

2: Configuration level

Task Name and Operations

Task Name	Operations
rpki	write

Usage Guidelines

Usage Scenario

After the area verification function is enabled, you can run the region-confederation command to create an area confederation. Each area confederation can be added to multiple areas.

Precautions

A maximum of 100 confederations can be configured in a single VS.

Example

# Create an area confederation.

<HUAWEI> system-view
[~HUAWEI] rpki
[*HUAWEI-rpki] region-validation
[*HUAWEI-rpki-region-validation] region-confederation 1
[*HUAWEI-rpki-region-validation-confederation-1]