routing-table limit (VPN instance IPv6 address family view)

Function

The routing-table limit command sets a limit on the maximum number of routes that the IPv4 or IPv6 address family of a VPN instance can support.

The undo routing-table limit command restores the default configurations.

By default, there is no limit on the maximum number of routes that the IPv4 or IPv6 address family of a VPN instance can support, but the total number of private network and public network routes on a device cannot exceed the unicast route limit supported by the device.

Format

routing-table limit number { alert-percent | simply-alert }

undo routing-table limit

Parameters

Parameter	Description	Value
number	Specifies the maximum number of routes supported by a VPN instance.	Ranges from 1 to 4294967295.
alert-percent	Specifies the percentage of the maximum number of routes. When the maximum number of routes that join the VPN instance is up to the value (number*alert-percent)/100, the system prompts alarms. The VPN routes can be still added to the routing table, but after the number of routes reaches number, the subsequent routes are dropped.	An integer ranging from 1 to 100.
simply-alert	Indicates that when VPN routes exceed number, routes can still be added into the routing table, but the system prompts alarms. However, after the total number of VPN routes and network public routes reaches the unicast route limit supported by the device, the subsequent VPN routes are dropped.	-

Parameter

Description

Value

number

Specifies the maximum number of routes supported by a VPN instance.

Ranges from 1 to 4294967295.

alert-percent

Specifies the percentage of the maximum number of routes. When the maximum number of routes that join the VPN instance is up to the value (number*alert-percent)/100, the system prompts alarms. The VPN routes can be still added to the routing table, but after the number of routes reaches number, the subsequent routes are dropped.

An integer ranging from 1 to 100.

simply-alert

Indicates that when VPN routes exceed number, routes can still be added into the routing table, but the system prompts alarms. However, after the total number of VPN routes and network public routes reaches the unicast route limit supported by the device, the subsequent VPN routes are dropped.

Views

VPN instance IPv6 address family view

Default Level

2: Configuration level

Task Name and Operations

Task Name	Operations
route-base	write

Usage Guidelines

Usage Scenario

To prevent excessive routes from being imported into the routing table of the IPv4 or IPv6 address family of a VPN instance, run the routing-table limit command to limit the maximum number of routes in the routing table. If the number of routes in the routing table of the IPv4 or IPv6 address family of a VPN instance exceeds the upper threshold, the excessive routes cannot be advertised to the peer. After the undo routing-table limit command is run, the excessive routes will be added to the VPN instance's routing table.

Precautions

If the simply-alert parameter is specified and the number of routes exceeds the upper threshold, only an alarm is generated, and the excessive routes are still added to the routing table.

If the number of IPv6 routes in a VPN instance exceeds the maximum number supported, both L3VPN_MIB_TRAP_THRESH_EXCEED and hwL3vpnIpv6RouteExceed alarms are reported. If the number of IPv6 routes in a VPN instance exceeds the middle threshold, both L3VPN_MIB_TRAP_MID_THRESH_EXCEED and hwL3vpnIpv6RouteThresholdExceed alarms are reported.

Example

# Set the alarm threshold of the number of routes that the IPv6 address family of the VPN instance named vpn1 can import to 1000.

<HUAWEI> system-view
[~HUAWEI] ip vpn-instance vpn1
[~HUAWEI-vpn-instance-vpn1] ipv6-family
[~HUAWEI-vpn-instance-vpn1-af-ipv6] routing-table limit 1000 simply-alert