screen-length temporary

Function

The screen-length temporary command sets the number of lines in each screen of the terminal.

The undo screen-length temporary command restores the number of rows in each screen of the terminal to the default value.

By default, the number of rows in one screen is 24.

Format

screen-length screen-length temporary

undo screen-length temporary

Parameters

Parameter Description Value
screen-length

Specifies the number of lines displayed on the split screen.

It is an integer data type. The value ranges from 0 to 512. Zero indicates the split screen is disabled.

Views

User view

Default Level

3: Management level

Task Name and Operations

Task Name Operations
tty execute

Usage Guidelines

Usage Scenario

The screen-length temporary command can be used to set the maximum line number on the current terminal. The configuration is temporary and is not effective after disconnection or system reboot.

Follow-up Procedure

If the output line number exceed the configured line number then you can enable the split-screen function temporarily to stop the output.

Precautions

The adjustment of lines per screen on the terminal is not recommended.

Example

# Set the number of lines in each screen of the terminal to 30.
<HUAWEI> screen-length 30 temporary
Parent Topic: Configuring User Interface Commands
Copyright © Huawei Technologies Co., Ltd.
Copyright © Huawei Technologies Co., Ltd.
< Previous topic Next topic >