sender

Function

The sender command creates a TWAMP Light Session-Sender and displays the TWAMP Light Session-Sender view. If the Session-Sender specified in the sender command has been created, the command displays the Session-Sender view.

The undo sender command deletes the TWAMP Light Session-Sender.

By default, no TWAMP Light Session-Sender is created.

Format

sender

undo sender

Parameters

None

Views

TWAMP-light view

Default Level

2: Configuration level

Task Name and Operations

Task Name	Operations
twampclient	write

Usage Guidelines

Usage Scenario

To start a TWAMP Light statistical service, run the sender command to create a TWAMP Light Session-Sender.

Precautions

A TWAMP Light session must be created on the Control-Client where TWAMP Light statistics are to be collected.
After a Session-Sender is deleted, only proactive measurement is stopped. On-demand measurement automatically stops after required statistics are collected.
To configure TWAMP Light, you must configure the Responder and then the Controller. If only the Controller is configured, the Responder sends a large number of TWAMP Light packets received from the Controller to the LDM, and responds to the Controller with a large number of ICMP packets.

Example

# Display the TWAMP Light Session-Sender view.

<HUAWEI> system-view
[~HUAWEI] nqa twamp-light
[*HUAWEI-twamp-light] sender
[*HUAWEI-twamp-light-sender]