sensor-group (Telemetry view)

Function

The sensor-group command creates one or more sampling sensor groups in the Telemetry view and enters the Sensor-group view.

The undo sensor-group command deletes one or more sampling sensor groups in the Telemetry view.

By default, no sampling sensor group is created in the Telemetry view.

sensor-group sensor-name

undo sensor-group sensor-name

Parameter	Description	Value
sensor-name	Specifies the name of a sampling sensor group.	The value is a string of 1 to 64 case-sensitive characters containing letters and digits. Spaces are not supported between letters or digits.

Parameter

Description

Value

sensor-name

Specifies the name of a sampling sensor group.

The value is a string of 1 to 64 case-sensitive characters containing letters and digits. Spaces are not supported between letters or digits.

Telemetry view

3: Management level

Task Name	Operations
telemetry	write

Usage Scenario

To sample the data collected, run the sensor-group command to create one or more sampling sensor groups first.

Precautions

A maximum of 25 sampling sensor groups can be created for each VS using this command.

# Create a sampling sensor group named infodata.

<HUAWEI> system-view
[~HUAWEI] telemetry
[~HUAWEI-telemetry] sensor-group infodata