The service-class command specifies an upstream or downstream service class.
The undo service-class command restores the default configuration.
By default, no upstream or downstream service class is specified, and flow queue (FQ) resources are automatically allocated to services. The default sequence is CS7, CS6, EF, AF4, AF3, AF2, AF1, and BE.
This command is supported only on the NetEngine 8000 F1A.
Parameter | Description | Value |
---|---|---|
cs7 |
Indicates that the service class is CS7. |
- |
cs6 |
Indicates that the service class is CS6. |
- |
ef |
Indicates that the service class is EF. |
- |
af4 |
Indicates that the service class is AF4. |
- |
af3 |
Indicates that the service class is AF3. |
- |
af2 |
Indicates that the service class is AF2. |
- |
af1 |
Indicates that the service class is AF1. |
- |
be |
Indicates that the service class is BE. |
- |
inbound |
Indicates the upstream direction. |
- |
outbound |
Indicates the downstream direction. |
- |
Configuration Impact
Precautions
In VS mode, this command is supported only by the admin VS.