service-class outbound enable

Function

The service-class outbound enable command enables the service-class function of a QPPB local policy in the outbound direction.

The undo service-class outbound enable command disables the service-class function of a QPPB local policy in the outbound direction.

By default, the service-class function of a QPPB local policy in the outbound direction is disabled.

Format

service-class outbound enable

undo service-class outbound enable

Parameters

None

Views

QPPB local-policy view

Default Level

2: Configuration level

Task Name and Operations

Task Name	Operations
qos	write

Usage Guidelines

Usage Scenario

If the service-class behavior is configured in a QPPB local policy, by default, the service-class behavior in the outbound direction is disabled. In a scenario, if there is a TM card in the board, traffic can be scheduled into the TM queue based on the qos-local-id. Run this command, this function in this scenario can be enabled.

Precautions

Only the eTM-equipped board supports downstream service-class actions in QPPB policies.

Example

# Enable the service-class function of a QPPB local policy in the outbound direction.

<HUAWEI> system-view
[~HUAWEI] qppb local-policy qppb1
[*HUAWEI-localpolicy-qppb1] service-class outbound enable