service-instance-group (NAT64 instance view)

Function

The service-instance-group command binds a NAT64 instance to a service-instance-group instance group.

The undo service-instance-group command deletes the binding between a NAT64 instance and a service-instance-group instance group.

By default, a NAT64 instance is bound to no service-location instance group.

This command is supported only on the NetEngine 8000 F1A.

Format

service-instance-group name

undo service-instance-group [ name ]

Parameters

Parameter Description Value
name

Specifies the name of a service-instance-group instance group.

The value is a string of 1 to 31 case-sensitive characters, spaces not supported. When double quotation marks are used around the string, spaces are allowed in the string.

Views

NAT64 instance view

Default Level

2: Configuration level

Task Name and Operations

Task Name Operations
nat write

Usage Guidelines

Usage Scenario

To bind a NAT64 instance to a service-instance-group instance group, run the service-instance-group command. This command helps properly transmit NAT64 services to a service board.

Prerequisites

A service-instance-group instance group has been created and bound to a service board.

Example

# Bind a service-instance-group instance group named group1 to a NAT64 instance named nat1 in the NAT64 instance view.
<HUAWEI> system-view
[~HUAWEI] service-instance-group group1
[*HUAWEI-service-instance-group-group1] quit
[*HUAWEI] nat64 instance nat1 id 1
[*HUAWEI-nat64-instance-nat1] service-instance-group group1
Parent Topic: NAT64 Configuration Commands
Copyright © Huawei Technologies Co., Ltd.
Copyright © Huawei Technologies Co., Ltd.
< Previous topic