service-policy-group

Function

The service-policy-group command creates a service policy group and enters the service policy group view.

The undo service-policy-group command deletes a service policy group.

By default, no service policy group is created.

This command is supported only on the NetEngine 8000 F1A.

Format

service-policy-group group-name

undo service-policy-group group-name

Parameters

Parameter	Description	Value
group-name	Specifies the name of a service policy group.	The value is a string case-sensitive characters, / \ : * ? " < > \| @ ' space and TAB not supported. In addition, the name cannot be - or --.

Parameter

Description

Value

group-name

Specifies the name of a service policy group.

The value is a string case-sensitive characters, / \ : * ? " < > | @ ' space and TAB not supported. In addition, the name cannot be - or --.

Views

System view

Default Level

2: Configuration level

Task Name and Operations

Task Name	Operations
vas	write

Usage Guidelines

Usage Scenario

If the EDSG policy server has not delivered EDSG service policies, you can run this command to create a service policy group and then run the service-policy command in the service policy group view to bind the EDSG service policy template to the service policy group. Then, run the service-policy-group command in the AAA domain view to apply the service policy group to the user access domain to activate the EDSG service using the local configuration.

Precautions

The device supports configuration of a maximum of 1024 service policy groups.

After the cu-agent configuration is performed on the device, the service-policy-group command cannot be run.

Example

# Configure the service policy group named group1.

<HUAWEI> system-view
[~HUAWEI] service-policy-group group1