server-port (GRPC IPv6 server view)

Function

The server-port command configures the number of a port to be listened by gRPC server.

The undo server-port command restores the default configuration.

By default, port 57400 is listened by gRPC server.

Format

server-port port-number

undo server-port [ port-number ]

Parameters

Parameter Description Value
port-number

Specifies the number of a port to be listened.

The value is an integer ranging from 10000 to 57999.

Views

GRPC IPv6 server view

Default Level

3: Management level

Task Name and Operations

Task Name Operations
grpc write

Usage Guidelines

If a collector functioning as a client initiates a connection to a device functioning as a server, the data sampled is dynamically subscribed to. In this case, you can run the server-port command to configure a server port to be listened. A connection can then be established between the server and client.

Example

# Set the port to be listened by gRPC IPv6 server during Telemetry dynamic subscription to port 20000.
<HUAWEI> system-view
[~HUAWEI] grpc
[~HUAWEI-grpc] grpc server ipv6
[~HUAWEI-grpc-server-ipv6] server-port 20000
Parent Topic: gRPC Configuration Commands
Copyright © Huawei Technologies Co., Ltd.
Copyright © Huawei Technologies Co., Ltd.
< Previous topic Next topic >