peer log-change (BGP-VPN instance view) (group)

Function

The peer log-change command enables a BGP device to log the session status and events of a specified group.

The undo peer log-change command cancels the configuration.

By default, a BGP device is enabled to log the session status and events of a specified peer group.

Format

peer group-name log-change

undo peer group-name log-change

Parameters

Parameter	Description	Value
group-name	Specifies the name of a peer group.	The name is a string of 1 to 47 case-sensitive characters, with spaces not supported. When double quotation marks are used around the string, spaces are allowed in the string.

Parameter

Description

Value

group-name

Specifies the name of a peer group.

The name is a string of 1 to 47 case-sensitive characters, with spaces not supported. When double quotation marks are used around the string, spaces are allowed in the string.

Views

BGP-VPN instance view, BGP multi-instance VPN instance view

Default Level

2: Configuration level

Task Name and Operations

Task Name	Operations
bgp	write

Usage Guidelines

Usage Scenario

The peer log-change command can be used to enable a device to log the session status and events of a specified peer group, facilitating service management.

Example

# Configure a BGP device to log the session status and events of peer group.

<HUAWEI> system-view
[~HUAWEI] ip vpn-instance vpn1
[*HUAWEI-vpn-instance-vpn1] quit
[*HUAWEI] bgp 100
[*HUAWEI-bgp] vpn-instance vpn1
[*HUAWEI-bgp-instance-vpn1] group test
[*HUAWEI-bgp-instance-vpn1] peer test log-change