ipv4 unicast (BMP session view)

Function

The ipv4 unicast command creates and displays the BMP session IPv4 unicast view.

The undo ipv4 unicast command deletes the BMP session IPv4 unicast view.

By default, the BMP session IPv4 unicast view does not exist.

Format

ipv4 unicast

undo ipv4 unicast

Parameters

None

Views

BMP session view

Default Level

2: Configuration level

Task Name and Operations

Task Name	Operations
bmp	write

Usage Guidelines

Usage Scenario

To create and enter the BMP session IPv4 unicast view, run the ipv4 unicast command in the BMP session view.

Follow-up Procedure

After this configuration is performed, you can run either of the following commands as needed:

trace-prefix ipv4-address mask-length: configures BMP to report the trace data of a specified IPv4 public network unicast route to the BMP server.
trace-prefix all: configures BMP to report the trace data of all IPv4 public network unicast routes to the BMP server.

Example

# Create and enter the BMP session IPv4 unicast view.

<HUAWEI> system-view
[~HUAWEI] bmp
[*HUAWEI-bmp] bmp-session 10.1.1.1
[*HUAWEI-bmp-session-10.1.1.1] ipv4 unicast
[*HUAWEI-bmp-session-10.1.1.1-ipv4-unicast]