dscp (grpc ipv6 server view)

Function

The dscp command configures a DSCP value for data packets sent.

The undo dscp command restores the default DSCP value of data packets sent.

By default, the DSCP value of a data packet sent is 0.

Format

dscp value

undo dscp

undo dscp value

Parameters

Parameter	Description	Value
value	Specifies the DSCP value for a data packet sent.	The value is an integer ranging from 0 to 63.

Parameter

Description

Value

value

Specifies the DSCP value for a data packet sent.

The value is an integer ranging from 0 to 63.

Views

GRPC IPv6 server view

Default Level

3: Management level

Task Name and Operations

Task Name	Operations
grpc	write

Usage Guidelines

The DSCP value is designed to ensure the communication service quality. It is an 8-bit identifier contained in an IP packet header, and identifies service types and priorities.

When network data transmission is stable, Telemetry does not need to change the DSCP value of the data packets sent. When packet loss occurs during data transmission, you can configure a DSCP value in the Telemetry view for the data packets sent. You can improve the priority of packet transmission to ensure the quality of network data transmission.

Example

# Set the DSCP value for data packets sent to 60.

<HUAWEI> system-view
[~HUAWEI] grpc
[~HUAWEI-grpc] grpc server ipv6
[*HUAWEI-grpc-server-ipv6] dscp 60