vrrp6 vrid holding-multiplier

Function

The vrrp6 vrid holding-multiplier command sets a multiplier of the interval at which VRRP6 Advertisement packets are sent for the timeout period of a backup device in a VRRP6 backup group.

The undo vrrp6 vrid holding-multiplier command restores the default multiplier of the interval at which VRRP6 Advertisement packets are sent for the timeout period of a backup device in a VRRP6 backup group.

By default, the timeout period of a backup device in a VRRP6 backup group is three times the interval at which VRRP6 Advertisement packets are sent.

Format

vrrp6 vrid virtual-router-id holding-multiplier holding-multiplier-value

undo vrrp6 vrid virtual-router-id holding-multiplier [ holding-multiplier-value ]

Parameters

Parameter	Description	Value
virtual-router-id	Specifies the ID of a VRRP6 backup group.	The value is an integer ranging from 1 to 255.
holding-multiplier-value	Specifies a multiplier of the interval at which VRRP6 Advertisement packets are sent for the timeout period of a backup device in a VRRP6 backup group.	The value is an integer ranging from 3 to 10.

Parameter

Description

Value

virtual-router-id

Specifies the ID of a VRRP6 backup group.

The value is an integer ranging from 1 to 255.

holding-multiplier-value

Specifies a multiplier of the interval at which VRRP6 Advertisement packets are sent for the timeout period of a backup device in a VRRP6 backup group.

The value is an integer ranging from 3 to 10.

Views

100ge sub-interface view, 100GE interface view, 10GE sub-interface view, 10GE interface view, 200GE sub-interface view, 25GE sub-interface view, 25GE interface view, 400GE sub-interface view, 400GE interface view, 40GE sub-interface view, 40GE interface view, 50GE sub-interface view, 50GE interface view, Eth-Trunk sub-interface view, Eth-Trunk interface view, FlexE interface view, GE optical interface view, GE sub-interface view, GE interface view, GE electrical interface view, Global VE sub-interface view, VE sub-interface view, VLANIF interface view

Default Level

2: Configuration level

Task Name and Operations

Task Name	Operations
vrrp	write

Usage Guidelines

Usage Scenario

To set a multiplier of the interval at which VRRP6 Advertisement packets are sent for the timeout period of a backup device in a VRRP6 backup group, run the vrrp6 vrid holding-multiplier command.

Prerequisites

A VRRP6 backup group has been configured using the vrrp6 vrid command.

Configuration Impact

If a VRRP6 backup group is not configured to monitor a service, a larger multiplier results in a longer timeout period for a backup device when the interval at which VRRP6 Advertisement packets are sent is the same.

Precautions

If a VRRP6 backup group is configured to monitor a service, the vrrp6 vrid holding-multiplier command hardly affects the timeout period of a backup device.

Example

# Set a multiplier of the interval at which VRRP6 Advertisement packets are sent for the timeout period of a backup device in VRRP6 backup group 1 to 4.

<HUAWEI> system-view
[~HUAWEI] interface GigabitEthernet 0/1/1
[~HUAWEI-GigabitEthernet0/1/1] ipv6 enable
[*HUAWEI-GigabitEthernet0/1/1] ipv6 address 2001:db8::1 64
[*HUAWEI-GigabitEthernet0/1/1] vrrp6 vrid 1 virtual-ip FE80::7 link-local
[*HUAWEI-GigabitEthernet0/1/1] vrrp6 vrid 1 holding-multiplier 4