mpls te resv-style (Tunnel interface view)

Function

The mpls te resv-style command specifies a reservation style.

The undo mpls te resv-style command restores the default reservation style.

By default, the reservation style is shared explicit (SE).

Format

mpls te resv-style { se | ff }

undo mpls te resv-style

Parameters

Parameter	Description	Value
se	Shared-Explicit style.	-
ff	Fixed-Filter style.	-

Parameter

Description

Value

Shared-Explicit style.

Fixed-Filter style.

Views

Tunnel interface view

Default Level

2: Configuration level

Task Name and Operations

Task Name	Operations
mpls-te	write

Usage Guidelines

Usage Scenario

To specify a resource reservation style for MPLS TE tunnels, run the mpls te resv-style command.

The SE style allows CR-LSPs in a tunnel to share the same bandwidth. The SE style must be set if a CR-LSP is re-established using the make-before-break (MBB) mechanism.

Example

# Set up a CR-LSP with the resource reservation style of FF.

<HUAWEI> system-view
[~HUAWEI] mpls
[*HUAWEI-mpls] mpls te
[*HUAWEI-mpls] mpls rsvp-te
[*HUAWEI-mpls] quit
[*HUAWEI] interface tunnel 1
[*HUAWEI-Tunnel1] tunnel-protocol mpls te
[*HUAWEI-Tunnel1] mpls te signal-protocol rsvp-te
[*HUAWEI-Tunnel1] mpls te resv-style ff