set said-node

Function

The set said-node command disables a specified system of active immunization and diagnosis (SAID) node or all SAID nodes.

The undo set said-node command restores the default SAID node configuration.

By default, all SAID nodes are enabled.

Format

set said-node said-name slot slot-id disable

set said-node said-name disable

set said-node all disable

undo set said-node said-name slot slot-id disable

undo set said-node said-name disable

undo set said-node all disable

Parameters

Parameter	Description	Value
said-name	Name of the SAID node.	The value is a string of 1 to 16 characters.
slot slot-id	ID of the slot.	The value is an integer that ranges from 1 to 16.
all	All SAID nodes.	-

Parameter

Description

Value

said-name

Name of the SAID node.

The value is a string of 1 to 16 characters.

slot slot-id

ID of the slot.

The value is an integer that ranges from 1 to 16.

all

All SAID nodes.

Views

System view

Default Level

2: Configuration level

Task Name and Operations

Task Name	Operations
forwarding	debug

Usage Guidelines

Usage Scenario

The diagnosis and recovery durations of a single SAID node must not exceed 10 and 30 minutes, respectively. If either duration is exceeded, the SAID node is disabled by default. When a SAID node is processing a large number of services, the processing efficiency of other SAID nodes may be reduced because of performance insufficiency. To guarantee the processing efficiency, you can run the set said-node command to disable this node.

If the node is not in the detecting state after being disabled, it automatically returns to the detecting state upon completion of the operation in the current phase. When the next SAID task is started to perform detection, the system detects that the SAID node is disabled and therefore skips it.

After the SAID node is enabled upon configuration completion, the device sends or receives ICMP packets. You can run the display said-node status command to check the status of the current SAID node.

Example

# Disable the SAID node with the ID of 8 in slot 1.

<HUAWEI> system-view
[~HUAWEI] set said-node aaa slot 1 disable
Info:The node status is successfully set in the SAID.

# Disable the slot 1 SAID_PING node.

<HUAWEI> system-view
[~HUAWEI] set said-node said-ping slot 1 disable
Info:The node status is successfully set in the SAID.