destination (Leaf-list view)

Function

The destination command creates a leaf node in a leaf list.

The undo destination command deletes leaf nodes in a leaf list.

By default, no leaf node is created in a leaf list.

Format

destination leaf-address

undo destination leaf-address

Parameters

Parameter	Description	Value
leaf-address	Leaf Address.	The value is in dotted decimal notation.

Parameter

Description

Value

leaf-address

Leaf Address.

The value is in dotted decimal notation.

Views

Leaf-list view

Default Level

2: Configuration level

Task Name and Operations

Task Name	Operations
mpls-te	write

Usage Guidelines

Usage Scenario

The VRP supports the way of using a leaf list to configure and manage leaf nodes on a P2MP TE tunnel. The destination command creates and modifies leaf nodes in a leaf list. The undo destination command deletes leaf nodes in a leaf list.

Prerequisites

A leaf list has been configured using the mpls te leaf-list command.

Follow-up Procedure

(Optional) Run the path command to configure explicit paths for the created leaf nodes.

Example

# Add a leaf node with IP address 2.2.2.2 to the leaf list iptvch1.

<HUAWEI> system-view
[~HUAWEI] mpls
[*HUAWEI-mpls] mpls te
[*HUAWEI-mpls] quit
[*HUAWEI] mpls te leaf-list iptvch1
[*HUAWEI-mpls-te-leaf-list-iptvch1] destination 2.2.2.2