mpls te tunnel-id (Tunnel interface view)

Function

The mpls te tunnel-id command specifies the ID for a tunnel.

The undo tunnel-id command deletes the tunnel ID configured for a TE tunnel.

By default, no tunnel ID is configured for a TE tunnel.

Format

mpls te tunnel-id tunnel-id

undo mpls te tunnel-id

Parameters

Parameter	Description	Value
tunnel-id	Tunnel ID.	The value is an integer that ranges from 1 to 32768.

Parameter

Description

Value

tunnel-id

Tunnel ID.

The value is an integer that ranges from 1 to 32768.

Views

Tunnel interface view

Default Level

2: Configuration level

Task Name and Operations

Task Name	Operations
mpls-te	write

Usage Guidelines

Usage Scenario

A tunnel ID must be set for a tunnel; otherwise, the tunnel fails to be established. A tunnel ID is unique on a local device. Tunnels on the same device must have different tunnel IDs.

Example

# Set the tunnel ID to 100.

<HUAWEI> system-view
[~HUAWEI] mpls
[*HUAWEI-mpls] mpls te
[*HUAWEI-mpls] quit
[*HUAWEI] interface Tunnel10
[*HUAWEI-Tunnel10] tunnel-protocol mpls te
[*HUAWEI-Tunnel10] mpls te tunnel-id 100
[*HUAWEI-Tunnel10] destination 2.2.2.2