sftp server enable (System view)

Function

The sftp server enable command enables the SFTP service on the SSH server.

The undo sftp server enable command disables the SFTP service on the SSH server.

By default, the SFTP service is not enabled on the SSH server.

sftp ipv4 server enable

sftp ipv6 server enable

undo sftp ipv4 server enable

undo sftp ipv6 server enable

Parameter	Description	Value
ipv6	Enables the IPv6 SFTP service.	-
ipv4	Enables the IPv4 SFTP service.	-

Parameter

Description

Value

ipv6

Enables the IPv6 SFTP service.

ipv4

Enables the IPv4 SFTP service.

System view

3: Management level

Task Name	Operations
ssh-server	write

To enable the SFTP service on the SSH server, run the sftp server enable command. A client can connect to a remote SSH server by SFTP only after the SFTP service is enabled on the SSH server.
The sftp ipv4 server enable command enables the IPv4 SFTP service on the SSH server.The sftp ipv6 server enable command enables the IPv6 SFTP service on the SSH server.
After you disable the SFTP service on the SSH server, all the clients that connect to the SSH server through SFTP are disconnected.

# Enable the ipv4 SFTP service on the SFTP server.

<HUAWEI> system-view
[~HUAWEI] sftp ipv4 server enable