display mac-address aging-time vlan

Function

The display mac-address aging-time vlan command displays the aging time of MAC address entries.

display mac-address aging-time vlan [ vlan-id1 [ to vlan-id2 ] ]

Parameter	Description	Value
vlan-id1	Displays the aging time of dynamic MAC address entries with the start VLAN ID.	The value is an integer ranging from 1 to 4094.
vlan-id2	Displays the aging time of dynamic MAC address entries with the end VLAN ID.	The value is an integer ranging from 1 to 4094.

Parameter

Description

Value

vlan-id1

Displays the aging time of dynamic MAC address entries with the start VLAN ID.

The value is an integer ranging from 1 to 4094.

vlan-id2

Displays the aging time of dynamic MAC address entries with the end VLAN ID.

The value is an integer ranging from 1 to 4094.

All views

1: Monitoring level

Task Name	Operations
mac	read

Usage Scenario

You can run this command to check the aging time of MAC addresses.

Precautions

If MAC address entries do not age, the aging time is displayed as 0 seconds.

If the aging time of MAC address entries in a VLAN is set, the aging time configured in the VLAN takes effect.

If the aging time of MAC address entries in a VLAN is not set, the global aging time of MAC address entries takes effect.

The actual command output varies according to the device. The command output here is only an example.

# Display the aging time of MAC address entries.

<HUAWEI> display mac-address aging-time vlan 10
  Aging time: 300 second(s)

**Table 1** Description of the **display mac-address aging-time vlan** command output
Item	Description
Aging time	Aging time of the MAC address entries.