signaling vpls (BGP-L2VPN-AD address family view)

Function

The signaling vpls command configures the signaling mode for all peers or peer groups as VPLS.

The undo signaling vpls command restores the default signaling mode of all peers or peer groups.

By default, after the peer enable command is run in the L2VPN AD address family view, the BGP AD signaling mode is enabled for all peers or peer groups.

Format

signaling vpls

undo signaling vpls

Parameters

Parameter	Description	Value
vpls	Configures the signaling mode of all peers or peer groups as VPLS.	-

Parameter

Description

Value

vpls

Configures the signaling mode of all peers or peer groups as VPLS.

Views

BGP-L2VPN-AD address family view

Default Level

2: Configuration level

Task Name and Operations

Task Name	Operations
bgp	write

Usage Guidelines

Usage Scenario

In BGP VPLS and BGP AD VPLS scenarios, configure the signaling mode for peers or peer groups in the L2VPN AD address family view so that peers can advertise routes to each other. The parameters used in different scenarios are described as follows:

In the BGP VPLS scenario, configure vpls in the signaling command.
In the BGP AD VPLS scenario, the BGP AD signaling is enabled for all peers or peer groups in the L2VPN AD address family view by default.
In VPLS multi-homing scenarios, after you run the signaling vpls command to enable VPLS signaling for all peers, run the signaling multi-homing non-standard-compatible command to enable VPLS Multi-homing signaling.

Prerequisites

A peer or peer group has been created using the peer enable command.

Precautions

The signaling mode configured for a peer group using the peer signaling command takes precedence over that configured using the signaling command. When a signaling mode is not configured for a peer or peer group, the peer and peer group use the signaling mode configured using the signaling command.

Example

# Configure the signaling mode for all peers or peer groups in the L2VPN AD address family view when BGP VPLS is enabled.

<HUAWEI> system-view
[~HUAWEI] bgp 100
[*HUAWEI-bgp] l2vpn-ad-family
[*HUAWEI-bgp-af-l2vpn-ad] signaling vpls