sip-server

Function

The sip-server command configures the IP address or name of an SIP server.

The undo sip-server command cancels the configuration.

By default, no SIP server is configured.

This command is supported only on the NetEngine 8000 F1A.

Format

sip-server { { ip-address ip-address } &<1-2> | { list server-name } &<1-2> }

undo sip-server

Parameters

Parameter	Description	Value
ip-address ip-address	Specifies the IP address of an SIP server.	The value is in the dotted decimal format.
list server-name	Specifies the name of an SIP server.	The value is a string of 1 to 63 characters.

Parameter

Description

Value

ip-address ip-address

Specifies the IP address of an SIP server.

The value is in the dotted decimal format.

list server-name

Specifies the name of an SIP server.

The value is a string of 1 to 63 characters.

Views

Bas IP address pool view

Default Level

2: Configuration level

Task Name and Operations

Task Name	Operations
ippool	write

Usage Guidelines

Usage Scenario

A maximum of two SIP servers can be configured in each address pool.

This command is not valid for the remote address pool.

Before configuring the IP address or name of an SIP server, ensure that the SIP server of the IP address or name exists and create a corresponding address pool by using the ip pool (system view) command in the system view.

Precautions

In VS mode, this command is supported only by the admin VS.

Example

# Set the IP address of the SIP server to 10.2.3.4 in the IP address pool huawei.

<HUAWEI> system-view
[~HUAWEI] ip pool huawei bas local
Info: It's successful to create an IP address pool
[*HUAWEI-ip-pool-huawei] commit
[~HUAWEI-ip-pool-huawei] sip-server ip-address 10.2.3.4