smart-clock debugging

Function

This command is used to generate alarms for the smart-clock module. Different types of alarms correspond to different alarm types.

This command is supported only on the NetEngine 8000 F1A.

smart-clock debugging alarm-val

Parameter	Description	Value
alarm-val	-	The value can be: 0 2 4 8 16 32 64 128 256 512 1024 2048 4096 8192 16384 32768 65536

GE electrical interface view

3: Management level

Task Name	Operations
clksync	debug

Usage Scenario

This command is used to generate alarms for the smart-clock module. Different types of alarms correspond to different alarm types.

# Configure the smart-clock module to generate alarms

<HUAWEI> system-view
[~HUAWEI] interface GigabitEthernet 0/1/0
[~HUAWEI-GigabitEthernet0/1/0] smart-clock debug 1024
[*HUAWEI-GigabitEthernet0/1/0]