snetconf server enable (System view)

Function

The snetconf server enable command enables the SNETCONF service on the SSH server.

The undo snetconf server enable command disables the SNETCONF service on the SSH server.

By default, the SNETCONF is not enabled.

Format

snetconf ipv4 server enable

snetconf ipv6 server enable

undo snetconf ipv4 server enable

undo snetconf ipv6 server enable

Parameters

Parameter	Description	Value
ipv6	Enables the IPv6 SNETCONF service.	-
ipv4	Enables the IPv4 SNETCONF service.	-

Parameter

Description

Value

ipv6

Enables the IPv6 SNETCONF service.

ipv4

Enables the IPv4 SNETCONF service.

Views

System view

Default Level

3: Management level

Task Name and Operations

Task Name	Operations
ssh-server	write

Usage Guidelines

Usage Scenario

To enable the SNETCONF service on the SSH server, run the snetconf server enable command.

If you run the snetconf server enable command, TCP port 22 supports both IPv4 and IPv6 SNETCONF connections and provides the SNETCONF service.
If you run the snetconf ipv4 server enable command, TCP port 22 supports IPv4 SNETCONF connections and provides the IPv4 SNETCONF service.
If you run the snetconf ipv6 server enable command, TCP port 22 supports IPv6 SNETCONF connections and provides the IPv6 SNETCONF service.
If you run the undo snetconf server enable command, TCP port 22 does not support SNETCONF connections or provide the SNETCONF service.

After you disable the SNETCONF service on the SSH server, all the clients that connect to the SSH server through TCP port 22 in SNETCONF mode are disconnected.

Example

# Enable the SNETCONF service on the server.

<HUAWEI> system-view
[~HUAWEI] snetconf ipv4 server enable