snmp-agent protocol server disable

Function

The snmp-agent protocol server disable command disables the SNMP IPv4 or IPv6 listening port.

The undo snmp-agent protocol server disable command enables the SNMP IPv4 or IPv6 listening port.

By default, the SNMP IPv4 or IPv6 listening port is disabled.

Format

snmp-agent protocol server disable

snmp-agent protocol server ipv4 disable

snmp-agent protocol server ipv6 disable

undo snmp-agent protocol server disable

undo snmp-agent protocol server ipv4 disable

undo snmp-agent protocol server ipv6 disable

Parameters

Parameter	Description	Value
ipv4	Disables the SNMP IPv4 listening port.	-
ipv6	Disables the SNMP IPv6 listening port.	-

Parameter

Description

Value

ipv4

Disables the SNMP IPv4 listening port.

ipv6

Disables the SNMP IPv6 listening port.

Views

System view

Default Level

3: Management level

Task Name and Operations

Task Name	Operations
snmp	write

Usage Guidelines

Usage Scenario

To enable alarm sending to the NMS without performing the Get/Set operation, SNMP port listening is not required. To disable the SNMP IPv4 and IPv6 listening port, run the snmp-agent protocol server disable command.

If ipv4 or ipv6 is not selected, both SNMP IPv4 and IPv6 listening ports are disabled.

Precautions

After you disable the SNMP IPv4 or IPv6 listening port using the snmp-agent protocol server disable command, SNMP no longer processes SNMP packets. Exercise caution when you disable the SNMP IPv4 or IPv6 listening port.

Example

# Disable the SNMP IPv4 listening port.

<HUAWEI> system-view
[~HUAWEI] snmp-agent
[*HUAWEI] snmp-agent protocol server ipv4 disable