snmp-agent trap enable feature-name

Function

The snmp-agent trap enable feature-name command enables the device to send a specified trap about a specified feature to the NMS.

The undo snmp-agent trap enable feature-name command restores the default trap function.

The clear configuration snmp-agent trap enable command deletes all the trap function configurations of a feature in a one-click manner.

To view the default trap configuration, run the display snmp-agent trap all command.

Format

snmp-agent trap enable feature-name feature-name [ trap-name trap-name ]

clear configuration snmp-agent trap enable feature-name feature-name

undo snmp-agent trap enable feature-name feature-name [ trap-name trap-name ]

Parameters

Parameter	Description	Value
feature-name feature-name	Specifies the name of a feature that generates traps.	The value is a string of 1 to 255 characters, which are case-insensitive and cannot be blank spaces.
trap-name trap-name	Specifies the name of a trap.	The value is a string of 1 to 63 case-insensitive characters, spaces not supported.

Parameter

Description

Value

feature-name feature-name

Specifies the name of a feature that generates traps.

The value is a string of 1 to 255 characters, which are case-insensitive and cannot be blank spaces.

trap-name trap-name

Specifies the name of a trap.

The value is a string of 1 to 63 case-insensitive characters, spaces not supported.

Views

System view

Default Level

3: Management level

Task Name and Operations

Task Name	Operations
log	write

Usage Guidelines

Usage Scenario

If trap-name trap-name is not specified in the snmp-agent trap enable feature-name command, the device sends all traps about a specified feature to the NMS.

The NMS can receive traps only after you run the snmp-agent target-host inform or snmp-agent target-host trap command to configure the NMS to receive SNMP traps.

To delete the trap function configurations of a feature when enabling or disabling the trap function using the snmp-agent trap enable feature-name or undo snmp-agent trap enable feature-name command, run the clear configuration snmp-agent trap enable command.

Configuration Impact

When enabling or disabling the global trap function, running the clear configuration snmp-agent trap enable feature-name feature-name command deletes the trap function configurations of a feature specified by feature-name and restores the trap function state to be the same as that of the global trap function.
If the global trap function is in the default state, running the clear configuration snmp-agent trap enable feature-name feature-name command deletes the trap function configurations of the feature specified by feature-name and restores the trap function state to the default.

Precautions

In VS mode, this command is supported only by the admin VS.

Example

# Enable the device to send the coldstart trap about SNMP to the NMS.

<HUAWEI> system-view
[~HUAWEI] snmp-agent trap enable feature-name snmp trap-name coldstart

# Delete all the trap function configurations of the FM feature in a one-click manner.

<HUAWEI> system-view
[~HUAWEI] snmp-agent
[*HUAWEI] clear configuration snmp-agent trap enable feature-name fm