snmp-agent protocol get-bulk timeout

Format

snmp-agent protocol get-bulk timeout time

undo snmp-agent protocol get-bulk timeout

Parameters

Parameter	Description	Value
time	Specifies a get-bulk operation timeout period.	The value is an integer ranging from 0 to 600, in seconds. The default value is 2. The value 0 indicates that a get-bulk operation never expires.

Parameter

Description

Value

time

Specifies a get-bulk operation timeout period.

The value is an integer ranging from 0 to 600, in seconds. The default value is 2.

The value 0 indicates that a get-bulk operation never expires.

Views

System view

Default Level

3: Management level

Task Name and Operations

Task Name	Operations
snmp	write

Usage Guidelines

Usage Scenario

A get-bulk operation allows an NMS to query information about multiple managed devices at a time, equaling multiple get-next operations.

If an NMS requests many data through a get-bulk operation, a long time is required to obtain the data. You can run the snmp-agent protocol get-bulk timeout command to change the get-bulk operation timeout period.

Precautions

You are not advised to change the get-bulk operation timeout period. The default get-bulk operation timeout period is recommended. To reconfigure a get-bulk operation timeout period, you must ensure that the configured period is less than an NMS's timeout period.

Example

# Set the get-bulk operation timeout period to 10 seconds.

<HUAWEI> system-view
[~HUAWEI] snmp-agent protocol get-bulk timeout 10