attack-defend enable

Function

The attack-defend enable command enables the SOC's attack defense function.

The undo attack-defend enable command disables the SOC's attack defense function.

By default, the SOC's attack defense function is enabled.

Format
Parameters
Views
Default Level
Task Name and Operations
Usage Guidelines
Example

Format

attack-defend enable

undo attack-defend enable

Parameters

None

Views

SOC view

Default Level

2: Configuration level

Task Name and Operations

Task Name	Operations
soc	write

Usage Guidelines

Usage Scenario

By default, the SOC's attack detection, attack source tracing and attack defense are enabled. The SOC automatically delivers attack defense policies if the device is being attacked. This function isolates attacks or protects the device against attacks.

In VS mode, this command is supported only by the admin VS.

Example

# Enable the SOC's attack defense function.

<HUAWEI> system-view
[~HUAWEI] soc
[*HUAWEI-soc] attack-defend enable