sr-te-policy group

Function

The sr-te-policy group command creates an SR-MPLS TE Policy group and displays the SR-MPLS TE Policy group view.

The undo sr-te-policy group command deletes an SR-MPLS TE Policy group.

By default, no SR-MPLS TE Policy group is created.

Format
Parameters
Views
Default Level
Task Name and Operations
Usage Guidelines
Example

Format

sr-te-policy group group-value

undo sr-te-policy group group-value

Parameters

Parameter	Description	Value
group-value	Specifies a name for an SR-MPLS TE Policy group.	The value is an integer ranging from 1 to 4294967295.

Parameter

Description

Value

group-value

Specifies a name for an SR-MPLS TE Policy group.

The value is an integer ranging from 1 to 4294967295.

Views

Segment routing view

Default Level

2: Configuration level

Task Name and Operations

Task Name	Operations
srpolicy	write

Usage Guidelines

Usage Scenario

To create an SR-MPLS TE Policy group, run the sr-te-policy group command. You can then add SR-MPLS TE Policies to the group to steer traffic into the SR-MPLS TE Policies based on DSCP values.

Example

# Create SR-MPLS TE Policy group 1.

<HUAWEI> system-view
[~HUAWEI] segment-routing
[*HUAWEI-segment-routing] sr-te-policy group 1