peer advertise-large-community (BGP IPv4 SR-Policy address family view)

Function

The peer advertise-large-community command enables a device to advertise the Large-Community attribute to a BGP peer.

The undo peer advertise-large-community command cancels the configuration.

By default, a device does not advertise the Large-Community attribute to its BGP peer.

Format

peer ipv4-address advertise-large-community

undo peer ipv4-address advertise-large-community

Parameters

Parameter	Description	Value
ipv4-address	Specifies the IPv4 address of a peer.	The value is in dotted decimal notation.

Parameter

Description

Value

ipv4-address

Specifies the IPv4 address of a peer.

The value is in dotted decimal notation.

Views

BGP IPv4 SR-Policy address family view

Default Level

2: Configuration level

Task Name and Operations

Task Name	Operations
bgp	write

Usage Guidelines

Usage Scenario

To enable a device to advertise the Large-Community attribute to its BGP peer, run the peer advertise-large-community command. If the Large-Community attribute is advertised to a peer, all the peer members in the group inherit this configuration. This simplifies the application of route-policies and facilitates route maintenance and management.

Prerequisites

Specific Large-Community values have been defined in a route-policy.

Example

# Enable a device to advertise the Large-Community attribute to a BGP peer.

<HUAWEI> system-view
[~HUAWEI] bgp 100
[*HUAWEI-bgp] peer 10.1.1.1 as-number 100
[*HUAWEI-bgp] ipv4-family sr-policy
[*HUAWEI-bgp-af-ipv4-srpolicy] peer 10.1.1.1 enable
[*HUAWEI-bgp-af-ipv4-srpolicy] peer 10.1.1.1 advertise-large-community