inner-type ipv4 (SRv6 locator End-AS view)

Function

The inner-type ipv4 command is used to configure the original packet support type that the SFF sends to the SF.

The undo inner-type ipv4 command is used to remove the original packet support type configured by the SFF.

By default, the original packet support type sent by the SFF to the SF is not configured.

Format

inner-type ipv4

undo inner-type ipv4

Parameters

None

Views

SRv6 locator End-AS view

Default Level

2: Configuration level

Task Name and Operations

Task Name	Operations
segr	write

Usage Guidelines

Usage Scenario

This command is used to configure the original packet support type that the SFF sends to the SF. Currently, the SRv6 service chain only supports IPv4 types.

Example

# Configure the SRv6 device to support the SFF service with the IPv4 type.

<HUAWEI> system-view
[~HUAWEI] segment-routing ipv6
[*HUAWEI-segment-routing-ipv6] locator test1 ipv6-prefix 2001:DB8:100:: 64 static 32
[*HUAWEI-segment-routing-ipv6-locator] opcode ::12 end-as
[*HUAWEI-segment-routing-ipv6-locator-endas-::12] inner-type ipv4