proxy peer-sid

Function

The proxy peer-sid command configures an End SID for the backup SFF on the master SFF.

The undo proxy peer-sid command deletes the End SID of the backup SFF.

By default, no backup SFF SID of End type is configured.

Format

proxy peer-sid peersid

undo proxy peer-sid [ peersid ]

Parameters

Parameter	Description	Value
peersid	End type SID.	The value is a 32-digit hexadecimal number, in the format of X:X:X:X:X:X:X:X.

Parameter

Description

Value

peersid

End type SID.

The value is a 32-digit hexadecimal number, in the format of X:X:X:X:X:X:X:X.

Views

Segment routing IPv6 view

Default Level

2: Configuration level

Task Name and Operations

Task Name	Operations
segr	write

Usage Guidelines

Usage Scenario

SRv6 SFC supports backup link protection. In backup link protection, an SF is dual-homed to two SFFs, with one as the master, and the other as the backup. The backup SFF is used to protect the primary SFF. If the primary SFF becomes unreachable, services are switched to the backup SFF for processing. The peer SID of the master SFF is the End SID of the backup SFF. The proxy peer-sid command is used to specify the End SID of the backup SFF on the master SFF.

Precautions

To ensure that the protection function is correctly configured, the peer-sid must be the End SID on the backup SFF and cannot be in the same locator as the End.AS SID.

Example

# After SRv6 is enabled, set the End SID of the backup SFF to 1:2:3::3:4 on the master SFF.

<HUAWEI> system-view
[~HUAWEI] segment-routing ipv6
[*HUAWEI-segment-routing-ipv6] proxy peer-sid 2001:DB8:1:2:3::3:4