endpoint (SRv6 flow group view)

Function

The endpoint command configures an endpoint for an SRv6 TE Flow Group.

The undo endpoint command deletes the endpoint configured for an SRv6 TE Flow Group.

By default, no endpoint is configured for an SRv6 TE Flow Group.

Format

endpoint ipv6-address

undo endpoint [ ipv6-address ]

Parameters

Parameter	Description	Value
ipv6-address	Specifies the endpoint of an SRv6 TE Flow Group.	The value is a 32-digit hexadecimal number, in the format of X:X:X:X:X:X:X:X.

Parameter

Description

Value

ipv6-address

Specifies the endpoint of an SRv6 TE Flow Group.

The value is a 32-digit hexadecimal number, in the format of X:X:X:X:X:X:X:X.

Views

SRv6 flow group view

Default Level

2: Configuration level

Task Name and Operations

Task Name	Operations
teflowgroup	write

Usage Guidelines

Usage Scenario

Statically configured SRv6 TE flow groups do not support route recursion but support only IS-IS shortcut. SRv6 TE flow groups are matched against the shortest path to the endpoint in the IS-IS topology, and then the corresponding SRv6 TE flow group is found based on the DSCP values carried in packets for forwarding. Only one endpoint can be configured for each SRv6 TE flow group.

Example

# Configure an endpoint for an SRv6 TE Flow Group.

<HUAWEI> system-view
[~HUAWEI] segment-routing ipv6
[*HUAWEI-segment-routing-ipv6] srv6-te flow-group flowgroup1
[*HUAWEI-segment-routing-ipv6-flow-group-flowgroup1] endpoint 1::1