match-type dscp (SRv6 flow group view)

Function

The match-type dscp command sets the type of an SRv6 TE Flow Group to DSCP.

The undo match-type dscp command deletes the type set for an SRv6 TE Flow Group.

By default, the type of an SRv6 TE Flow Group is not set.

Format

match-type dscp

undo match-type dscp

Parameters

None

Views

SRv6 flow group view

Default Level

2: Configuration level

Task Name and Operations

Task Name	Operations
teflowgroup	write

Usage Guidelines

Usage Scenario

Run the match-type dscp command to set the policy type to DSCP.

The group-color-match-dscp command specifies the mapping between DSCP values and different tunnel types (SRv6-TE Policy, Native IP addresses).

Precautions

After the match type configuration is deleted, the mapping configuration of the SRv6 TE Flow Group is deleted.

Example

# Configure the type of SRv6 TE Flow Group.

<HUAWEI> system-view
[~HUAWEI] segment-routing ipv6
[*HUAWEI-segment-routing-ipv6] srv6-te flow-group flowgroup1
[*HUAWEI-segment-routing-ipv6-flow-group-flowgroup1] match-type dscp