remote end-op

Function

The remote end-op command configures a remote End.OP SID with a specified mask length.

The undo remote end-op command deletes a specified remote End.OP SID.

By default, the remote End.OP SID is not configured.

remote end-op op-sid prefix-length

undo remote end-op op-sid [ prefix-length ]

Parameter	Description	Value
op-sid	Remote End.OP SID.	The value is a 32-digit hexadecimal number, in the format of X:X:X:X:X:X:X:X.
prefix-length	Length of the prefix.	The value is an integer that ranges from 1 to 128.

Parameter

Description

Value

op-sid

Remote End.OP SID.

The value is a 32-digit hexadecimal number, in the format of X:X:X:X:X:X:X:X.

prefix-length

Length of the prefix.

The value is an integer that ranges from 1 to 128.

Segment routing IPv6 view

2: Configuration level

Task Name	Operations
segr	write

Usage Scenario

To configure a remote End.OP SID with a specified mask length, run this command in the segment routing IPv6 view.

Pay attention to the following aspects during the configuration:

Multiple remote End.OP SIDs can be configured at the same time. The maximum number of remote End.OP SIDs can be customized. By default, the maximum number is 4096.
The prefix and mask length of the configured SID cannot conflict with each other.

# Configure remote End.OP SID.

<HUAWEI> system-view
[~HUAWEI] segment-routing ipv6
[*HUAWEI-segment-routing-ipv6] remote end-op 1::80 96