srv6-te-policy locator

Function

The srv6-te-policy locator command associates an SRv6 TE Policy with an SRv6 locator and specifies a binding SID for the SRv6 TE Policy.

The undo srv6-te-policy locator command restores the default configuration.

By default, SRv6 TE policy does not associated with a locator.

Format

srv6-te-policy locator locator-name

undo srv6-te-policy locator [ locator-name ]

Parameters

Parameter	Description	Value
locator-name	Specifies SRv6 locator.	The value is a string of 1 to 31 case-sensitive characters. When double quotation marks are used around the string, spaces are allowed in the string.

Parameter

Description

Value

locator-name

Specifies SRv6 locator.

The value is a string of 1 to 31 case-sensitive characters. When double quotation marks are used around the string, spaces are allowed in the string.

Views

Segment routing IPv6 view

Default Level

2: Configuration level

Task Name and Operations

Task Name	Operations
srpolicy	write

Usage Guidelines

Usage Scenario

After configuring the Binding SID for the SRv6 TE Policy, you can use the Binding SID for path stitching. The Binding SID needs to be configured within the Locator network segment.

You can use this command to associate an SRv6 TE Policy with an SRv6 locator and specify a binding SID for the SRv6 TE Policy.

Example

# Configure an SRv6 TE Policy to associate with a locator in Segment Routing IPv6.

<HUAWEI> system-view
[~HUAWEI] segment-routing ipv6
[~HUAWEI-segment-routing-ipv6] locator test1 ipv6-prefix 1::1 64 static 32
[*HUAWEI-segment-routing-ipv6-locator] quit
[*HUAWEI-segment-routing-ipv6] srv6-te-policy locator test1