srv6-te-policy suppress-flapping disable

Function

The srv6-te-policy suppress-flapping disable command disables flapping suppression for all SRv6 TE Policies.

The undo srv6-te-policy suppress-flapping disable command enables flapping suppression for all SRv6 TE Policies.

By default, the flapping suppression for all SRv6 TE Policies is enabled.

Format

srv6-te-policy suppress-flapping disable

undo srv6-te-policy suppress-flapping disable

Parameters

None

Views

Segment routing IPv6 view

Default Level

2: Configuration level

Task Name and Operations

Task Name	Operations
srpolicy	write

Usage Guidelines

Usage Scenario

To disable flapping suppression for all SRv6 TE Policies, run the srv6-te-policy suppress-flapping disable command.

After flapping suppression is enabled, if the SID status frequently alternates between up and down, the status changes need to be suppressed. In this case, if the SID status changes to down, the system immediately updates the segment list status to down. However, if the SID status changes to up, the system determines whether flapping suppression is required. If flapping suppression is required, the system changes the SID status to up after a delay and updates the segment list status.

Example

# Disable the suppress flapping function for SRv6 TE Policies.

<HUAWEI> system-view
[~HUAWEI] segment-routing ipv6
[*HUAWEI-segment-routing-ipv6] srv6-te-policy suppress-flapping disable