ssh server ip-block disable

Function

The ssh server ip-block disable command disables an SSH server from locking client IPv4 or IPv6addresses.

The undo ssh server ip-block disable command enables an SSH server to lock client IPv4 and IPv6 addresses.

By default, an SSH server is enabled to lock client IP addresses.

ssh server ip-block disable

undo ssh server ip-block disable

None

System view

3: Management level

Task Name	Operations
ssh-server	write

If an SSH server is enabled to lock client IP addresses, locked client IP addresses fail to pass authentication and are displayed in the display ssh server ip-block list command output.
If an SSH server is disabled from locking client IP addresses, the display ssh server ip-block list command does not display any client IP address that is locked because of authentication failures.
The operation to disable an SSH server from locking client IP addresses poses system risks and is thereby not recommended.

# Disable an SSH server from locking client IP addresses.

<HUAWEI> system-view
[~HUAWEI] ssh server ip-block disable