ssl verify-ip

Function

The ssl verify-ip command configures the NMS IP address needed to be authenticated.

The undo dcn connect-mode command deletes the NMS IP address.

By default, not to authenticate the NMS IP address.

Format
Parameters
Views
Default Level
Task Name and Operations
Usage Guidelines
Example

Format

ssl verify-ip

undo ssl verify-ip

Parameters

None

Views

DCN view

Default Level

2: Configuration level

Task Name and Operations

Task Name	Operations
dcn	write

Usage Guidelines

Usage Scenario

To improve the security for TCP connections between a GNE and its connected NMSs, run the ssl verify-ip command to authenticate NMS IP addresses, to check whether the IP addresses are the same as them in certificate.

Prerequisites

The DCN feature has been enabled globally using the dcn command in the system view.

In VS mode, this command is supported only by the admin VS.

Example

# Configure the NMS IP address to be authenticated.

<HUAWEI> system-view
[~HUAWEI] dcn
[*HUAWEI-dcn] set compatible mode
[*HUAWEI-dcn] ssl verify-ip