ssm-mapping policy

Function

The ssm-mapping policy command configures an IPv4 SSM mapping policy.

Using the undo ssm-mapping policy command deletes an IPv4 SSM mapping policy.

By default, no IPv4 SSM mapping policy is configured.

Format

ssm-mapping policy policy-name

undo ssm-mapping policy policy-name

Parameters

Parameter	Description	Value
policy-name	Indicates the name of an SSM mapping policy.	The value is a string of 1 to 31 case-insensitive characters.

Parameter

Description

Value

policy-name

Indicates the name of an SSM mapping policy.

The value is a string of 1 to 31 case-insensitive characters.

Views

System view

Default Level

2: Configuration level

Task Name and Operations

Task Name	Operations
mcast-base	write

Usage Guidelines

Usage Scenario

When users connected to different interfaces want to watch programs multicast by different multicast sources, run the ssm-mapping policy command to configure different SSM mapping policies on different interfaces. After that, IGMP packets received by different interfaces can be mapped to different multicast sources and users' requirements can be answered.

Prerequisites

SSM mapping and a corresponding policy have been enabled on the interface using the igmp ssm-mapping enable command.

When an IPv4 SSM mapping policy is deleted, all the configuration information of the policy will be deleted.

Example

# Configure an SSM mapping policy ssmmap1 in the system view.

<HUAWEI> system-view
[~HUAWEI] ssm-mapping policy ssmmap1