ssm-mapping ipv6 policy

Format

ssm-mapping ipv6 policy policy-name

undo ssm-mapping ipv6 policy policy-name

Parameters

Parameter	Description	Value
policy-name	Sets an SSM mapping policy name.	The value is a string of 1 to 31 case-insensitive characters, spaces not supported. The string can contain spaces if it is enclosed in double quotation marks (").

Parameter

Description

Value

policy-name

Sets an SSM mapping policy name.

The value is a string of 1 to 31 case-insensitive characters, spaces not supported. The string can contain spaces if it is enclosed in double quotation marks (").

Views

System view

Default Level

2: Configuration level

Task Name and Operations

Task Name	Operations
mcast-base	write

Usage Guidelines

Usage Scenario

If users connected different interfaces need to receive multicast service flows from different sources, run the ssm-mapping ipv6 policy command to configure an SSM mapping policy. Then, under the policy, configure mapping policies for different interfaces, so that MLD messages can map to different multicast sources.

When an IPv6 SSM mapping policy is deleted, all configurations of the policy will be deleted.

Example

# Create an SSM mapping policy named ssmmap1 in the system view.

<HUAWEI> system-view
[~HUAWEI] ssm-mapping ipv6 policy ssmmap1
[*HUAWEI-ssm-map6-ssmmap1]