session suppress disable

Function

The session suppress disable command disables LDP session flapping suppression.

The undo session suppress disable command restores the default setting.

By default, this function is enabled.

Format

session suppress disable

undo session suppress disable

Parameters

None

Views

MPLS-LDP view

Default Level

2: Configuration level

Task Name and Operations

Task Name	Operations
mpls-ldp	write

Usage Guidelines

Usage Scenario

If an LDP session goes Up and Down for multiple times within a period of time, the upstream and downstream LSPs related to the LDP session are created and deleted. As a result, a large number of network protocol packets are transmitted, affecting upstream and downstream devices. Configuring LDP session flapping suppression can reduce session flapping to a certain extent. To disable LDP session flapping suppression, run the session suppress disable command.

Example

# Disable LDP session flapping suppression.

<HUAWEI> system-view
[~HUAWEI] mpls
[*HUAWEI-mpls] mpls ldp
[*HUAWEI-mpls-ldp] session suppress disable