statistics-timer

Function

The statistics-timer command configures an interval at which the router sends BGP running statistics to a monitoring server.

The undo statistics-timer command restores the default configuration.

By default, the interval at which the router sends BGP running statistics to the monitoring server is 3600s.

Format

statistics-timer time

undo statistics-timer time

undo statistics-timer

Parameters

Parameter	Description	Value
time	Specifies the interval at which the router sends BGP running statistics to the monitoring server.	The value is an integer ranging from 15 to 65535, in seconds.

Parameter

Description

Value

time

Specifies the interval at which the router sends BGP running statistics to the monitoring server.

The value is an integer ranging from 15 to 65535, in seconds.

Views

BMP view

Default Level

2: Configuration level

Task Name and Operations

Task Name	Operations
bmp	write

Usage Guidelines

Usage Scenario

To configure an interval at which the router sends BGP running statistics to a monitoring server, run the statistics-timer command. You can configure the interval based on the network stability requirements. If BGP requires high stability, configure a small interval. However, if the router sends BGP running statistics frequently, a large amount of bandwidth resources will be consumed. Therefore, retaining the default value is recommended.

Example

# Set the interval at which the router sends BGP running statistics to a monitoring server to 100s.

<HUAWEI> system-view
[~HUAWEI] bmp
[*HUAWEI-bmp] statistics-timer 100