twoway-jitter threshold

Function

The twoway-jitter threshold command configures a two-way jitter alarm threshold.

The undo twoway-jitter threshold command cancels the two-way jitter alarm threshold.

By default, the two-way jitter alarm threshold is 10 milliseconds, and the alarm clearance threshold is 8 milliseconds.

Format

twoway-jitter threshold test-session session-id upper-limit upper-limit lower-limit lower-limit

undo twoway-jitter threshold test-session session-id [ upper-limit upper-limit lower-limit lower-limit ]

Parameters

Parameter	Description	Value
upper-limit upper-limit	Specifies a two-way jitter alarm threshold.	The value is an integer ranging from 2 to 1000, in milliseconds. The default value is 10.
lower-limit lower-limit	Specifies a two-way jitter clear alarm threshold.	The value is an integer ranging from 1 to 999, in milliseconds. The default value is 8.
test-session session-id	Specifies the ID of a test session.	The value is an integer ranging from 1 to 2048.

Parameter

Description

Value

upper-limit upper-limit

Specifies a two-way jitter alarm threshold.

The value is an integer ranging from 2 to 1000, in milliseconds. The default value is 10.

lower-limit lower-limit

Specifies a two-way jitter clear alarm threshold.

The value is an integer ranging from 1 to 999, in milliseconds. The default value is 8.

test-session session-id

Specifies the ID of a test session.

The value is an integer ranging from 1 to 2048.

Views

TWAMP-light view

Default Level

2: Configuration level

Task Name and Operations

Task Name	Operations
twampclient	write

Usage Guidelines

Usage Scenario

To configure a two-way jitter alarm threshold, run the twoway-jitter threshold command. The command output helps network administrators to adjust link bandwidth in time for service quality guarantee.

Prerequisites

A TWAMP Light test session has been created on the Control-Client.

Example

# Configure a two-way jitter alarm threshold.

<HUAWEI> system-view
[~HUAWEI] nqa twamp-light
[~HUAWEI-twamp-light] client
[~HUAWEI-twamp-light-client] test-session 1 sender-ip 1.1.1.1 reflector-ip 2.2.2.2 sender-port 3000 reflector-port 3000
[~HUAWEI-twamp-light-client] quit
[~HUAWEI-twamp-light] twoway-jitter threshold test-session 1 upper-limit 20 lower-limit 3