stelnet server enable (System view)

Function

The stelnet server enable command enables the STelnet service on the SSH server.

The undo stelnet server enable command disables the STelnet service on the SSH server.

By default, the STelnet service is not enabled on the SSH server.

stelnet ipv4 server enable

stelnet ipv6 server enable

undo stelnet ipv4 server enable

undo stelnet ipv6 server enable

Parameter	Description	Value
ipv6	Enables the IPv6 STelnet service.	-
ipv4	Enables the IPv4 STelnet service.	-

Parameter

Description

Value

ipv6

Enables the IPv6 STelnet service.

ipv4

Enables the IPv4 STelnet service.

System view

3: Management level

Task Name	Operations
ssh-server	write

To enable TCP port 22 to support the STelnet service, run the stelnet server enable command. A client can connect to a remote SSH server by STelnet only after the STelnet service is enabled on the SSH server.
The stelnet ipv4 server enable command enables the IPv4 STelnet service on the SSH server.The stelnet ipv6 server enable command enables the IPv6 STelnet service on the SSH server.
After you disable the STelnet service on the SSH server, all clients that have logged in through STelnet are disconnected.

# Enable the ipv4 STelnet service on the SSH server.

<HUAWEI> system-view
[~HUAWEI] stelnet ipv4 server enable