stopbits

Function

The stopbits command configures the stop bit of a user interface.

The undo stopbits command restores the stop bit of a user interface.

By default, the stop bit is 1 bit.

stopbits stopbitvalue

undo stopbits

Parameter	Description	Value
stopbitvalue	Specifies the stop bit.	The value is an enumerated type, which is 1.5, 1, 2.

Parameter

Description

Value

stopbitvalue

Specifies the stop bit.

The value is an enumerated type, which is 1.5, 1, 2.

CONSOLE-type user interface view, VTY-type user interface view

3: Management level

Task Name	Operations
tty	write

Usage Scenario

If the stop bit of a user interface is 1 bit, the corresponding number of data bits is 8.
If the stop bit of a user interface is 1.5 bits, the corresponding number of data bits is 5.
If the stop bit of a user interface is 2 bits, the corresponding number of data bits is 6, 7, or 8.

Precautions

In VS mode, this command is supported only by the admin VS.

# Set the stop bit of a console user interface to 1.5 bits.

<HUAWEI> system-view
[~HUAWEI] user-interface console 0
[~HUAWEI-ui-console0] stopbits 1.5