sub-port-queue

Function

The sub-port-queue command creates or displays a sub-interface queue profile.

The undo sub-port-queue command deletes a sub-interface queue profile.

By default, no sub-interface queue profile is created in the system.

Format

sub-port-queue sub-port-queue-name

undo sub-port-queue sub-port-queue-name

Parameters

Parameter	Description	Value
sub-port-queue sub-port-queue-name	Specifies the name of a sub-interface queue.	The value is a string of 1 to 31 case-sensitive characters, spaces not supported.

Parameter

Description

Value

sub-port-queue sub-port-queue-name

Specifies the name of a sub-interface queue.

The value is a string of 1 to 31 case-sensitive characters, spaces not supported.

Views

System view

Default Level

2: Configuration level

Task Name and Operations

Task Name	Operations
qos	write

Usage Guidelines

Usage Scenario

After a sub-interface queue profile is created using the sub-port-queue command, you can set scheduling parameters for it. When a sub-interface queue applies for resources, parameters in the profile are used to schedule all user traffic on the sub-interface.

Before using the sub-port-queue command, note the following:

If the sub-interface queue profile specified by sub-port-queue-name does not exist, the system creates a new sub-interface queue profile.
If the profile specified by sub-port-queue-name exists, the sub-interface queue profile view is displayed. You can modify the sub-interface queue profile.

Configuration Impact

A sub-interface queue profile that is bound to an interface or sub-interface cannot be deleted.

Precautions

You can configure a maximum of 100 sub-interface queue profiles in the system.

Example

# Create a sub-interface queue profile named a.

<HUAWEI> system-view
[~HUAWEI] sub-port-queue a
[*HUAWEI-sub-port-queue-a]