suppress-period

Function

The suppress-period command configures a suppression period for a customized event.

The undo suppress-period command restores the default configuration.

The default suppression period of a customized event is 10 seconds.

Format

suppress-period period

undo suppress-period [ period ]

Parameters

Parameter	Description	Value
period	Specifies a suppression period for a customized event.	The value is an integer ranging from 0 to 3600, in seconds.

Parameter

Description

Value

period

Specifies a suppression period for a customized event.

The value is an integer ranging from 0 to 3600, in seconds.

Views

Sensor-path-self-defined-event view

Default Level

3: Management level

Task Name and Operations

Task Name	Operations
telemetry	write

Usage Guidelines

Usage Scenario

When the filter criteria in a filter are met, a customized event is repeatedly reported. To prevent such frequent reporting, run the suppress-period command to configure a suppression period for the customized event. After the command is run, the customized event is not repeatedly reported within the suppression period

Prerequisites

A customized event has been configured using the sensor-path self-defined-event command.

Example

# Set a suppression period to 30 seconds for a customized event.

<HUAWEI> system-view
[~HUAWEI] telemetry
[~HUAWEI-telemetry] sensor-group 1
[*HUAWEI-telemetry-sensor-group-1] sensor-path huawei-ifm:ifm/interfaces/interface self-defined-event
[*HUAWEI-telemetry-sensor-group-1-self-defined-event-path] suppress-period 30